Skip to main content
SIGN UP FOR SPECIALS & GET 10% OFF  
FREE 18K Gold Vermeil Angel Wing Necklace on $1500+ Orders  
SIGN UP FOR SPECIALS & GET 10% OFF  
FREE Angel Wing Necklace on $1000+ Orders  
FREE ENGRAVING
LIFETIME WARRANTY
FREE SHIPPING
FREE 60-DAY RETURNS

Men's Wedding Bands

Over 900 men's bands, each made to order at our New York bench. Pick a style below, then choose the metal, a width from 3mm to 12mm, the profile and the finish. Most men land between 6mm and 8mm, and engraving inside the band is free.
Filters
Reset All
841 Results
Ring Style
Ring Width
Diamond Shape
Setting Type
Price Range
Precious Metal 1
841 Results
Platinum Reset All

Men's Wedding Bands, Made to Order in New York

Every band on this page is made after the order is placed, at our bench in the New York Diamond District. That is why one design can be ordered in 10K, 14K or 18K gold, in platinum, or in palladium on selected styles, in white, yellow or rose, and in widths from 3mm to 12mm. You are choosing a specification, not the nearest thing in a drawer.

How to Choose the Width of a Men's Wedding Band

Roughly two thirds of the bands here are 6mm, 7mm or 8mm, and that is where most men end up. Under 5mm reads modern and disappears under a glove. At 9mm and above the ring becomes the point, and it needs a longer finger to carry it without crowding the knuckle. Width changes how a ring feels far more than how it photographs: add 2mm and the band sits noticeably higher against the fingers either side. Between two widths, take the narrower one for daily wear.

What is a Comfort Fit Men's Wedding Band?

A comfort fit band is domed on the inside, so only the center of the ring touches the finger. It clears the knuckle more easily and traps less moisture, which matters on something worn every day. It also runs large. Order half a size down from your measured size in a comfort fit band, and take that measurement at the end of the day rather than first thing. Our ring size chart has the full method.

Men's Wedding Band Finishes

High polish shows every scratch and polishes back to new in minutes. Satin, cross satin, wire matte, sandblast and hammered finishes hide daily marks far better and are the sensible choice for anyone who works with their hands. Stone and rough finishes go further still. Any finish can be restored, and refinishing is covered by the lifetime warranty.

Men's Wedding Band Styles

Classic and plain bands keep the profile and the finish as the whole design. Two tone bands combine white, yellow and rose gold in one ring. Diamond bands set stones flush or in channels so nothing protrudes. Carved and fancy designs work the surface with grooves, bevels and hand engraving. Celtic bands carry trinity, Dara and Claddagh knotwork, and religious bands carry crosses, the Ichthys and the Star of David. Square bands swap the round outer profile for four flat faces, sports themed rings cover six games, braided bands are woven by hand from strands of gold, the Benchmark collection carries that brand's comfort fit designs, and the best sellers are the designs that come back through the workshop most often.

Buying two rings rather than one? The same designs are matched across a pair in our his and hers wedding bands collection.

Men's Wedding Bands FAQ

Find answers to your most common questions about men's wedding bands.

On this page, simpler gold bands start around $300. Most of the first-grid styles sit roughly $500–$1,500. Platinum and diamond men’s bands run higher. Every band is made after you order, so the price is the metal, width, and spec you pick, not a stock SKU.

Start with width (most men here land on 6mm, 7mm, or 8mm), then metal, then finish. High polish shows every scratch; satin, matte, sandblast, and hammered hide daily wear. If he works with his hands, pick a tougher finish. Style last: plain, two-tone, diamond, carved, Celtic, religious, square, sports, braided, or Benchmark.

We make these in 10K, 14K, and 18K gold (white, yellow, rose), platinum, and palladium on selected styles. Gold is the usual daily-wear choice. Platinum is heavier and hypoallergenic. Palladium is platinum-family, lighter. White gold can be re-rhodiumed; that’s covered under the lifetime service.

The inside is domed, so only the center of the ring touches the finger. It clears the knuckle more easily and traps less moisture. It also runs large; order a half size down from the measured size, and measure at the end of the day. Ring size chart.

About two-thirds of the bands on this page are 6mm, 7mm, or 8mm. Under 5mm reads modern and disappears under a glove. At 9mm and up the ring becomes the point and needs a longer finger. Add 2mm and it sits noticeably higher against the fingers on either side. Between two widths, take the narrower one for daily wear. Available 3mm–12mm.

No. Same metal family is enough if you want them to look related. If you want an actual pair, the same designs are matched in his & hers wedding bands.

Request a free ring sizer and we’ll mail it. Or measure at the end of the day with our chart. Comfort fit: half size down. Wrong size on a stock-spec made-to-order band is usually resizeable; engraved and custom pieces follow the return rules below.

Warm water, a drop of mild dish soap, soft brush, rinse over a strainer (not an open sink), lint-free cloth. Don’t ultrasonic-clean tension or channel-set diamond bands at home unless we say so. High polish can be brought back; satin and hammered can be refinished. Refinishing, cleaning, polishing, prong tightening, and rhodium are covered under the lifetime warranty (semi-annual inspection required to keep the warranty active).

Made after the order, 5–7 business days in the shop, then FedEx. US shipping is free and insured. $0–$1,000 usually goes Ground (5–7 business days in transit).

Yes, free engraving on eligible bands. Engraved rings are returnable only with a 30% processing fee. Custom / special-order pieces are not returnable.

60 days, original unworn condition, RMA required. You pay return shipping. Engraved: 30% fee. Custom / special order: no returns. International: final sale.

At our bench, 22 West 48th St, Suite 401, New York, NY 10036 (Diamond District). Showroom by appointment: 1-800-201-3404 or service@25karats.com.